Fandom

Minecraft Wiki

Fire Suppression System

793pages on
this wiki
Add New Page
Comments0 Share
Book This is a Guide.

This article has been assembled by one or more members of the community as a helpful resource, instructing players on some aspect of Minecraft. If desired, you may clarify or expand this article youself.

Book

This is a very easy-to-create structure which helps automatically put out Fires in the vicinity, without constant flooding.

Procedure

All that is required are 6 blocks of Wool and a Bucket filled with Water. First, make a 3x3x3 cube with the wool, but leave the middle hollow. Then, fill the center block of the cube with water (as depicted in the tables below).

Top and bottom layers Middle layer
None None None None
BlockCSS
Wool
None
None
BlockCSS
Wool
None
BlockCSS
Wool
BlockCSS
Water
BlockCSS
Wool
None None None None
BlockCSS
Wool
None


How it works

If fire ever comes into contact with any part of the wool cube, the water will be released, dousing some or all of the fire.

Players who place these around their structures should place at least one near valuable, flammable blocks. Keep in mind that that the water will only spread eight blocks from where this structure is built, and it will flow into any holes in the floor within that radius, stopping it from spreading further. Also, be careful to place these structures close enough to the valuable blocks, that they will cover the area in water before the fire destroys them.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.